huck model 2502-625 hydraulic rivet tool

Description

Huck Model
2502-625 Hydraulic Rivet Gun
Huck Models 2502 and A2502 Hydraulic
Installation Tools are designed to install a wide
range of Huck Blind Fasteners and HUCKBOLT
® Fasteners. This mini-tool is a lightweight
and compact tool which particularly adapts it to
install fasteners in limited clearance areas.
The tool is designed to be powered by a Huck
POWERIG® Hydraulic Unit set to operate at a
maximum of (*) 5,700 psi (39,300 kPa)
PULL and 2,200 psi (15,180 kPa) RETURN
pressures. CAUTION: To install -12 diameter
fasteners in MG, GP and LGP, only, PULL
pressure must be set at 8400 psi. See (*)
below.
Model 2502 has an electric switch for POWERIG
Hydraulic Unit Models 918, 918-5, 940,
943-913, or equivalent. Model A2502 has an air
trigger for POWERIG Hydraulic Unit Model 942
and Model 970-3. Model 970-3 may be used
when lower PULL and RETURN pressures are
sufficient.
A nose assembly is required for each fastener
type and size. Nose assemblies must be
ordered separately. See your Huck representative
for available Nose Assembly Selection
Chart and additional Fastener Selection Chart.
Each tool is complete with 12 ft. hydraulic hoses
and couplings, electric switch and cord (2502) or
air trigger and tubing (A2502). The tool is basically
a cylinder and piston assembly. An unloading
valve, designed to relieve the hydraulic pressure
at end of PULL stroke, is positioned by the
piston. The end of the piston rod is threaded
and a retaining nut and stop are included for
attaching nose assemblies.
TABLE 1 - SPECIFICATIONS (1)
Length 7.88 in. (201 mm)
Width 2.00 in. (51.5 mm)
Height (incl. handle) 5.88 in. (150 mm)
Weight 4.50 lbs. (2.04 kg)
Max. PULL press. 5700/8400 psi (*) (39,300/57,900 kPa)
Max. RETURN press. 2400 psi (16,500 kPa)
Power Source: Huck POWERIG Hydraulic Unit
(1) Lengths and weights do not include nose assemblies.